Premiere Straight-Grade
Diesel engine oil – 10W, 30
Premiere straight-grade engine oil is an advanced, high performance engine oil, designed to exceed the requirements of heavy-duty engines that require a straight grade oil. Premiere straight-grade contains high quality detergents and dispersants, to keep engines free of varnish and sludge for longer engine life.
Features & benefits
- Oil durability: High quality paraffinic base oils provide good oxidation control. This translates to longer oil life at higher operating temperatures.
- Wear protection: Protects critical parts from premature wear
- Oil pumpability: Premiere pumps better than industry requirements, improving oil circulation and reducing engine wear during cold start-ups.
- Deposit control: Multiple engine tests have demonstrated tremendous engine cleanliness in critical areas.
- Oil consumption control: Reduced deposits and superior wear protection lead to good control over oil consumption
- TBN retention: Excellent Total Base Number (TBN) retention, to neutralize harmful engine deposits to keep detergents and dispersants protecting your engine throughout the drain interval.
Excellent performance
- Older 2- and 4-stroke diesel engines calling for a 30 grade
- Meets ash requirement for Detroit Diesel 149, 53, 71, and 92 series 2-stroke engines
- Stationary engines, such as irrigation and standby generators
- Off-highway agricultural and construction equipment
Typical uses
- Older agricultural and construction diesel and gasoline engines
- Some hydraulics and transmission applications
- Stationary engines, such as irrigation and standby generators
-
Typical specifications
SAE viscosity grade 10W 30 API service CF/SL CF-2, CF/SE API gravity lbs/gal 30.8/7.26 29.6/7.31 Viscosity @ 40°C, cSt 45 90.6 Viscosity @ 100°C 7.2 11.2 Viscosity index 100 100 Pour point, °F (°C) /-44 (-42) /-33 (-36) MRV-TP1 viscosity, cP @ °C 14,000 @ -30 -- CCS viscosity, cP @ °C 5,500 @ -25 0 Total base no. (TBN), (D 2896) 8 8 Sulfated ash wt. % 0.8 0.8
-
Recommended for
- Hydraulic systems calling for 10W engine oil and a minimum zinc level of 900 ppm
- Allison C-4, C-3 (10W) manual transmission such as ArvinMeritor
- Dana Spicer, Eaton Fuller calling for a 30 or 50 grade mineral oil