Hi-Performance - 2-Cycle
Ashless engine oil
Hi-Performance 2-Cycle Engine Oil is an advanced formulation oil designed for use in direct injection or premixed 2-cycle engines. This oil is formulated to give outstanding performance in snowmobiles, ATVs, personal watercraft, outboard motors, lawn and garden equipment and motorcycles. This oil provides better detergency and lubricity than other formulations of 2-cycle oil. A -50°F pour point also makes this an excellent oil for snowmobiles.
Features & benefits
- Deposit protection: Reduces ring sticking, carbon buildup in combustion chambers and spark plugs resulting in increased engine efficiency and economy.
- Wear prevention: Careful base stock and additive selection provides lubricity and film strength under a full range of engine operating conditions protecting against cylinder scuffing and bearing wear resulting in increased engine life.
- Reduced smoke: A unique balance of components produces less smoke to improve environmental concerns and riding comfort.
- Direct injection or pre-mix: This advanced formulation allows operators to use any gasoline/oil ratio recommended by engine manufacturers. A special solvent allows easy mixing at low temperatures. Contains a blue dye for easy detection.
Excellent performance
- Outboards, personal watercraft
- ATV’s, motorcycles
- Chain saws (low output)
- Mowers, weed trimmers, leaf blowers
- Small engine repair facilities
- Marinas
Typical uses
- Snowmobiles
- ATVs
- Personal watercraft
- Outboard motors
- Lawn and garden equipment
- Motorcycles
-
Typical specifications
SAE viscosity grade Viscosity @ 40°C, cSt 42.4 Viscosity @ 100°C, cSt 7.5 Viscosity index 145 Pour point °F (°C) -49 (-45) Flash point, °F 140 minimum Color Blue
-
Recommended for
2-cycle water-cooled and air-cooled engines, direct injection or pre-mix, where the manufacturer calls for:
- NMMA TC-W3
- TC-WII™
- TC-W™
- API TC
- JASO FB
- ISO EG-B 2-cycle ashless engine oil
Recommended for snowmobiles with power valves. Those that might require the use of full synthetic oils should follow the manufacturer’s recommendation.